Grants for Small businesses - Federal

This funding opportunity provides financial support to small businesses in the U.S. for conducting exploratory clinical trials or biomarker validation studies aimed at advancing therapies for neurological disorders.

This funding opportunity provides financial support for small businesses and research institutions in the U.S. to develop innovative high-voltage direct current technologies that improve grid resilience and facilitate the integration of renewable energy sources.

This funding opportunity is designed for small businesses to develop affordable and innovative devices that can quickly and accurately detect both known and unknown drugs in biological samples, particularly in resource-limited settings like emergency departments and health centers.

This funding opportunity is designed for U.S.-based small businesses to develop innovative, cost-effective drug detection devices that can quickly identify both known and new drugs without relying on traditional antibody-based methods.

This grant provides funding to small businesses for innovative research projects that can be commercialized, particularly those addressing federal agencies' research needs and promoting participation from underrepresented groups.

This funding opportunity provides financial support to small businesses with active Phase I SBIR or STTR grants from NIH or CDC, helping them accelerate the commercialization of biomedical and public health innovations through training and market research.

This program provides financial assistance to rural small businesses and agricultural producers for renewable energy projects and energy efficiency improvements to help reduce energy costs and promote sustainability.

This program provides funding to small and medium-sized manufacturing companies and water/wastewater treatment facilities to implement energy efficiency improvements and reduce emissions, while also creating job opportunities in disadvantaged communities.

This grant provides funding to U.S. small businesses for developing biologics-based therapies aimed at treating neurological and neuromuscular disorders.

This funding opportunity provides financial support to state and local governments or educational institutions that operate programs assisting small businesses in understanding and complying with environmental regulations, particularly in air quality and pollution control.

This initiative provides up to $10 million in prizes to innovators developing advanced LED lighting solutions that improve energy efficiency, quality, and accessibility for commercial use.

This funding opportunity supports small businesses in developing innovative technologies and services for population-wide genomic screening to improve primary care for common genetic conditions.

This funding opportunity supports small U.S.-based businesses in developing innovative solutions for population genomic screening to improve primary care practices and enhance patient outcomes.

This funding opportunity supports collaborative research efforts to improve the prevention, treatment, and understanding of cancers associated with HIV, involving various specialized teams and clinical trials accessible to diverse populations.

The "FY 2025 Phase I Release 1" grant is a funding opportunity provided by the Department of Energy (DOE) for small businesses to conduct innovative research or development projects that have commercial potential and support the DOE's mission, with successful Phase I grantees eligible to apply for further support in Phase II.

To obtain a copy of the Funding Opportunity Announcement (FOA) please go to the ARPA-E website at https://arpa-e-foa.energy.gov. To apply to this FOA, Applicants must register with and submit application materials through ARPA-E eXCHANGE (https://arpa-e-foa.energy.gov/Registration.aspx). For detailed guidance on using ARPA-E eXCHANGE, please refer to the ARPA-E eXCHANGE User Guide (https://arpa-e-foa.energy.gov/Manuals.aspx). ARPA-E will not review or consider concept papers submitted through other means. For problems with ARPA-E eXCHANGE, email [email protected] (with FOA name and number in the subject line). Questions about this FOA? Check the Frequently Asked Questions available at http://arpa-e.energy.gov/faq. For questions that have not already been answered, email [email protected]. Agency Overview: The Advanced Research Projects Agency Energy (ARPA-E), an organization within the Department of Energy (DOE), is chartered by Congress in the America COMPETES Act of 2007 (P.L. 110-69), as amended by the America COMPETES Reauthorization Act of 2010 (P.L. 111-358), as further amended by the Energy Act of 2020 (P.L. 116-260): (A) to enhance the economic and energy security of the United States through the development of energy technologies that (i) reduce imports of energy from foreign sources; (ii) reduce energy-related emissions, including greenhouse gases; (iii) improve the energy efficiency of all economic sectors; (iv) provide transformative solutions to improve the management, clean-up, and disposal of radioactive waste and spent nuclear fuel; and (v) improve the resilience, reliability, and security of infrastructure to produce, deliver, and store energy; and (B) to ensure that the United States maintains a technological lead in developing and deploying advanced energy technologies. ARPA-E issues this Funding Opportunity Announcement (FOA) under its authorizing statute codified at 42 U.S.C. 16538. The FOA and any cooperative agreements or grants made under this FOA are subject to 2 C.F.R. Part 200 as supplemented by 2 C.F.R. Part 910. ARPA-E funds research on, and the development of, transformative science and technology solutions to address the energy and environmental missions of the Department. The agency focuses on technologies that can be meaningfully advanced with a modest investment over a defined period of time in order to catalyze the translation from scientific discovery to early-stage technology. For the latest news and information about ARPA-E, its programs and the research projects currently supported, see: http://arpa-e.energy.gov/. ARPA-E funds transformational research. Existing energy technologies generally progress on established learning curves where refinements to a technology and the economies of scale that accrue as manufacturing and distribution develop drive improvements to the cost/performance metric in a gradual fashion. This continual improvement of a technology is important to its increased commercial deployment and is appropriately the focus of the private sector or the applied technology offices within DOE. In contrast, ARPA-E supports transformative research that has the potential to create fundamentally new learning curves. ARPA-E technology projects typically start with cost/performance estimates well above the level of an incumbent technology. Given the high risk inherent in these projects, many will fail to progress, but some may succeed in generating a new learning curve with a projected cost/performance metric that is significantly better than that of the incumbent technology. ARPA-E funds technology with the potential to be disruptive in the marketplace. The mere creation of a new learning curve does not ensure market penetration. Rather, the ultimate value of a technology is determined by the marketplace, and impactful technologies ultimately become disruptive that is, they are widely adopted and displace existing technologies from the marketplace or create entirely new markets. ARPA-E understands that definitive proof of market disruption takes time, particularly for energy technologies. Therefore, ARPA-E funds the development of technologies that, if technically successful, have clear disruptive potential, e.g., by demonstrating capability for manufacturing at competitive cost and deployment at scale. ARPA-E funds applied research and development. The Office of Management and Budget defines applied research as an original investigation undertaken in order to acquire new knowledgedirected primarily towards a specific practical aim or objective and defines experimental development as creative and systematic work, drawing on knowledge gained from research and practical experience, which is directed at producing new products or processes or improving existing products or processes. Applicants interested in receiving financial assistance for basic research (defined by the Office of Management and Budget as experimental or theoretical work undertaken primarily to acquire new knowledge of the underlying foundations of phenomena and observable facts)1 should contact the DOEs Office of Science (http://science.energy.gov/). Office of Science national scientific user facilities (http://science.energy.gov/user-facilities/) are open to all researchers, including ARPA-E Applicants and awardees. These facilities provide advanced tools of modern science including accelerators, colliders, supercomputers, light sources and neutron sources, as well as facilities for studying the nanoworld, the environment, and the atmosphere. Projects focused on early-stage R for the improvement of technology along defined roadmaps may be more appropriate for support through the DOE applied energy offices including: the Office of Energy Efficiency and Renewable Energy (http://www.eere.energy.gov/), the Office of Fossil Energy and Carbon Management (https://www.energy.gov/fecm/office-fossil-energy-and-carbon-management), the Office of Nuclear Energy (http://www.energy.gov/ne/office-nuclear-energy), and the Office of Electricity (https://www.energy.gov/oe/office-electricity). Program Overview: The Nuclear Energy Waste Transmutation Optimized Now (NEWTON) program will support the research and development of technologies that enable the transmutation of used nuclear fuel (UNF) to alleviate the impact of storage in permanent disposal facilities. This program seeks to fund the development of novel technologies that increase the overall capacity factor, power output, and efficiency of particle generation systems (including but not limited to proton, neutron, and/or photon), by reducing beam trip magnitude and duration (referred to as loss of beam). Additional technologies will focus on increasing the throughput of transmutation by developing target materials that maximize transmutation rates and are easily processible to remove the transmuted material. The United States does not currently have an active facility for the permanent disposal of used nuclear fuel derived from the civilian nuclear sector. Used nuclear fuel comprises several classes of isotopes that could be processed in different ways due to their economic value. Firstly, uranium (U), which comprises greater than 95% of the mass of UNF, can be reprocessed and converted back into fuel for light-water reactors through the addition of small amounts of uranium-235 (U-235). Secondly, plutonium (Pu) and minor actinides (MAs), such as neptunium (Np), americium (Am), and curium (Cm), which together comprise roughly 1.5% of UNF by mass, are produced from nuclear fission. Many of these isotopes are fissionable and could be incorporated into fuels designed for advanced reactor concepts. Intermediate-lived fission products (ILFPs) including strontium-90 (Sr-90) and caesium-137 (Cs-137) have relatively short half-lives of roughly 30 years and have applications in radioisotope thermoelectric generators for space applications. However, ILFPs are largely destined for permanent disposal in a deep geological repository. The major long-lived fission products (LLFPs) have half-lives exceeding 200,000 years and have few commercial applications. LLFPS include selenium-79 (Se-79),technetium-99 (Tc-99), tin-126 (Sn-126), iodine-129 (I-129), and caesium-135 (Cs-135). The last class of isotopes are the stable isotopes produced from nuclear fission and resulting decay. These isotopes could be extracted from UNF, but no commercial processing of these have been undertaken. A deep geological disposal facility for the disposition of UNF in the U.S. has been estimated to cost $96.18 billion over the 150-year lifetime, after which the facility would cease to accept new waste. This facility would be able to store 70,000 metric tons (MT) of unprocessed UNF, which is insufficient for the existing volume of civilian waste. Densification of the waste can be accomplished through removal of the plutonium, minor actinides, and ILFP components of the UNF. Removal of 99.9% of these components would allow a densification factor of 225, based on current disposal requirements, thus allowing a single repository to store upwards of approximately 16 million MT of UNF. The LLFPs are responsible for many of the engineered barriers that are required to be built in the repository due to their long half-lives and environmental mobility. Removal of these LLFPs could decrease the capital expenditure of a permanent geological repository while also improving safety. To view the FOA in its entirety, please visit https://arpa-e-foa.energy.gov.

The anticipated funding opportunity announcement (FOA) aims to support research and development projects under the Vehicle Technologies Office (VTO). The goals include the demonstration of smart charge management for electric vehicles, improvement of 12-volt lead-acid batteries for safety-critical electric vehicle applications, development of strategies to reduce the likelihood of cascading effects of electric vehicle fires, reduction in battery electrode, cell, and pack manufacturing costs, advancement of silicon-based anodes for lithium-ion batteries, and development of high-energy density conversion cathodes. The FOA emphasizes advancing equity, addressing the climate crisis, and achieving net-zero emissions by 2050. Eligible applicants are encouraged to include underrepresented groups and underserved communities in their project teams. The FOA will fund activities related to electric vehicle (EV) technologies, focusing on areas such as smart charge management, safety improvements in EV batteries, cost reduction in battery manufacturing, and the development of advanced battery materials. The Department of Energy aims to drive innovation in clean energy technologies, ensuring environmental justice and inclusion. Specific areas of interest include wide-scale demonstrations of smart charge management, enhancement of safety-critical 12-volt lead-acid batteries, reduction of cascading effects of battery fires, cost reduction in battery manufacturing, and the development of high-energy-density battery components.

The Geothermal Resources’ Value in Implementing Decarbonization (GRID) FOA aims to advance the Biden-Harris Administration's goals for a carbon-pollution-free electricity sector by 2035 and a net-zero emissions economy by 2050. The program focuses on regional grid modeling studies to quantify geothermal power's potential contribution to a decarbonized grid. Eligible applicants must submit a Letter of Intent by July 24th, 2024, and full applications by September 9th, 2024. The program offers funding between $500,000 and $1,500,000, with an estimated total funding of approximately $7 million.

To obtain a copy of the Funding Opportunity Announcement (FOA) please go to the ARPA-E website at https://arpa-e-foa.energy.gov. To apply to this FOA, Applicants must register with and submit application materials through ARPA-E eXCHANGE (https://arpa-e-foa.energy.gov/Registration.aspx). For detailed guidance on using ARPA-E eXCHANGE, please refer to the ARPA-E eXCHANGE User Guide (https://arpa-e-foa.energy.gov/Manuals.aspx). ARPA-E will not review or consider concept papers submitted through other means. For problems with ARPA-E eXCHANGE, email [email protected] (with FOA name and number in the subject line). Questions about this FOA? Check the Frequently Asked Questions available at http://arpa-e.energy.gov/faq. For questions that have not already been answered, email [email protected]. Agency Overview: The Advanced Research Projects Agency Energy (ARPA-E), an organization within the Department of Energy (DOE), is chartered by Congress in the America COMPETES Act of 2007 (P.L. 110-69), as amended by the America COMPETES Reauthorization Act of 2010 (P.L. 111-358), as further amended by the Energy Act of 2020 (P.L. 116-260): (A) to enhance the economic and energy security of the United States through the development of energy technologies that (i) reduce imports of energy from foreign sources; (ii) reduce energy-related emissions, including greenhouse gases; (iii) improve the energy efficiency of all economic sectors; (iv) provide transformative solutions to improve the management, clean-up, and disposal of radioactive waste and spent nuclear fuel; and (v) improve the resilience, reliability, and security of infrastructure to produce, deliver, and store energy; and (B) to ensure that the United States maintains a technological lead in developing and deploying advanced energy technologies. ARPA-E issues this Funding Opportunity Announcement (FOA) under its authorizing statute codified at 42 U.S.C. 16538. The FOA and any cooperative agreements or grants made under this FOA are subject to 2 C.F.R. Part 200 as supplemented by 2 C.F.R. Part 910. ARPA-E funds research on, and the development of, transformative science and technology solutions to address the energy and environmental missions of the Department. The agency focuses on technologies that can be meaningfully advanced with a modest investment over a defined period of time in order to catalyze the translation from scientific discovery to early-stage technology. For the latest news and information about ARPA-E, its programs and the research projects currently supported, see: http://arpa-e.energy.gov/. ARPA-E funds transformational research. Existing energy technologies generally progress on established learning curves where refinements to a technology and the economies of scale that accrue as manufacturing and distribution develop drive improvements to the cost/performance metric in a gradual fashion. This continual improvement of a technology is important to its increased commercial deployment and is appropriately the focus of the private sector or the applied technology offices within DOE. In contrast, ARPA-E supports transformative research that has the potential to create fundamentally new learning curves. ARPA-E technology projects typically start with cost/performance estimates well above the level of an incumbent technology. Given the high risk inherent in these projects, many will fail to progress, but some may succeed in generating a new learning curve with a projected cost/performance metric that is significantly better than that of the incumbent technology. ARPA-E funds technology with the potential to be disruptive in the marketplace. The mere creation of a new learning curve does not ensure market penetration. Rather, the ultimate value of a technology is determined by the marketplace, and impactful technologies ultimately become disruptive that is, they are widely adopted and displace existing technologies from the marketplace or create entirely new markets. ARPA-E understands that definitive proof of market disruption takes time, particularly for energy technologies. Therefore, ARPA-E funds the development of technologies that, if technically successful, have clear disruptive potential, e.g., by demonstrating capability for manufacturing at competitive cost and deployment at scale. ARPA-E funds applied research and development. The Office of Management and Budget defines applied research as an original investigation undertaken in order to acquire new knowledgedirected primarily towards a specific practical aim or objective and defines experimental development as creative and systematic work, drawing on knowledge gained from research and practical experience, which is directed at producing new products or processes or improving existing products or processes. Applicants interested in receiving financial assistance for basic research (defined by the Office of Management and Budget as experimental or theoretical work undertaken primarily to acquire new knowledge of the underlying foundations of phenomena and observable facts) should contact the DOEs Office of Science (http://science.energy.gov/). Office of Science national scientific user facilities (http://science.energy.gov/user-facilities/) are open to all researchers, including ARPA-E Applicants and awardees. These facilities provide advanced tools of modern science including accelerators, colliders, supercomputers, light sources and neutron sources, as well as facilities for studying the nanoworld, the environment, and the atmosphere. Projects focused on early-stage R for the improvement of technology along defined roadmaps may be more appropriate for support through the DOE applied energy offices including: the Office of Energy Efficiency and Renewable Energy (http://www.eere.energy.gov/), the Office of Fossil Energy and Carbon Management (https://www.energy.gov/fecm/office-fossil-energy-and-carbon-management), the Office of Nuclear Energy (http://www.energy.gov/ne/office-nuclear-energy), and the Office of Electricity (https://www.energy.gov/oe/office-electricity). SBIR/STTR Program Overview: The Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs are Government-wide programs authorized under Section 9 of the Small Business Act (15 U.S.C. 638). The objectives of the SBIR program are to (1) stimulate technological innovation in the private sector, (2) strengthen the role of Small Business Concerns in meeting Federal R needs, (3) increase private sector commercialization of innovations derived from Federal R activities, (4) foster and encourage participation by socially and economically disadvantaged and women-owned Small Business Concerns, and (5) improve the return on investment from Federally funded research and economic benefits to the Nation. The objective of the STTR program is to stimulate cooperative partnerships of ideas and technologies between Small Business Concerns and partnering Research Institutions through Federally funded R activities. ARPA-E administers a joint SBIR/STTR program in accordance with the Small Business Act and the SBIR and STTR Policy Directive issued by the U.S. Small Business Administration (SBA). ARPA-E provides SBIR/STTR funding in three phases (Phase I, Phase II, and Phase IIS). Program Overview: The Technologies to Emend and Obviate SYnthetic Nitrogens Toll on Emissions (TEOSYNTE) program aims to lower nitrous oxide (N2O) emissions from the cultivation of corn and sorghum used for United States ethanol production by 50%. The program will emphasize plant and microbial bio-design strategies that lower the application of synthetic nitrogen (N) fertilizer on corn and sorghum fields while maintaining crop yields and reducing 50% of N2O emissions. Lowering the requirements of synthetic N fertilizer will also lower costs to farmers, as the cost of fertilizer is a significant portion of the operating expenses of a farm. This program will enable technologies to reduce N fertilizer consumption and N2O emissions. These technologies will transform agriculture and lower the N2O contribution to the carbon intensity (CI) of ethanol produced today for light duty vehicles and in the future for sustainable aviation fuel. Technologies developed under the TEOSYNTE program must achieve specific targets as outlined in Section I.E. in order to meet the programs objectives to reduce greenhouse gas (GHG) emissions and N fertilizer usage over multiple seasons while maintaining crop yields. To view the FOA in its entirety, please visit https://arpa-e-foa.energy.gov.

This grant provides funding to U.S.-based small businesses to develop innovative health-related technologies that require clinical trials, with a focus on projects that align with the missions of the NIH and CDC.